OUR PRODUCT RANGE
PERMA MASTER PRIME-CN
NON SOLVENTED EPOXY BONDING AGENT AND PRIMER FOR CONCRETE SURFACES
Porosity of concrete surfaces, moisture and the alkalinity of the concrete surface makes it difficult for the epoxy products to bond with the concrete bases effectively. To get over these problems an effective epoxy bonding agent or a primer is made use of. Perma Master Prime-CN is a two component product based on non solvented Epoxy Base and Epoxy Reactor. Perma Master Prime-CN binds the epoxy products firmly to the cementitious bases.
To bind epoxy mortars and flooring products to the concrete base taking care of the porosity of the base and mobilizing the particles of the mortars into the crevices and holes in the base.
Perma Master Prime-CN is applied on a dry concrete surface which is at least 28 days old before laying epoxy flooring materials or coating. Perma Master Prime-CN forms a part of the system with Perma Master Floor-SL, Perma Master Floor-HD and Perma Heavy Duty Mortar(HDM).
- Perma Master Prime-CN thoroughly wets the concrete surface and mobilizes the particles of the epoxy products effectively on the concrete surfaces and makes it easier for epoxy products to bond with the concrete effectively.
- Perma Master Prime-CN being moisture tolerant makes the priming easy. There is no need to blow torch the surfaces to make them bone dry. A reasonable dry surface is good enough.
- Perma Master Prime-CN is resistant to alkalis hence there is no need for the cumbersome process of acid etching the surface.
|Component A – Liquid
|Component B – Liquid
|Colour Of Mixture
|Straw colour / pale yellow
|Appx 1 hour at 25°C
|A) In Concrete 3 N/mm2
|B) In Steel 15 N/mm2
|+10 °C + 40°C
Surface to be primed with Perma Master Prime-CN should be free from dust, dirt, oil, grease, loose particles and excessive moisture.
DIRECTION FOR USE
Mix the base and the reactor components of Perma Master Prime-CN till a uniform consistency and colored liquid is obtained. Brush apply this on the surface to be primed.
Perma Master Prime-CN covers 3 to 4 square meter per kg. Higher coverage may be achieved if the base is sufficiently smooth and good.
HEALTH AND SAFETY
Epoxy products generally cause irritation to the skin. Use of hand gloves by the workers is advised. Upon completion of days work all the packing material should be burnt and buried.
Perma Master Prime-CN is available in 1 kg pre weighted units.
Perma Master Prime-CN has a shelf life of 12 months from the date of manufacture.
PERMA warrants that all products are free from any defects of manufacture and comply with the specifications given in their respective technical data sheet. No warranty can be given as to the results of use because conditions of use, such as site conditions, surface preparations, workmanship, weather, structural issues and other factors are beyond the control of PERMA. Purchaser agrees to seek the advice of qualified professionals to carry out tests & take trials to determine the suitability of products for their intended purpose prior to full scale usage of PERMA products and assumes all risks.
The company does not assume any liability for unsatisfactory results, arising from the use of our products. Purchaser’s sole liability is limited to replacement of product or refund of the purchase price paid if any product proven defective. No other warranties, express or implied, shall apply including any warranty of merchantability or fitness for a particular purpose. PERMA shall not be liable for any consequential damages arising from the use of our products for unsatisfactory results.
The information supplied in this datasheet is based on our experience through extensive research and is given in good faith in order to help prospective users. We reserve the right to update the information provided in our technical data sheet at any time without prior notice within the scope of technical progress or new developments.
Click the below Button to print the current page.