pic

OUR PRODUCT RANGE

 

permalogo

PERMA C-TONE FILLER

icon

CEMENTITIOUS COLOURED PREMIX TILE JOINT MORTAR

 

permasealDESCRIPTION

Perma C-Tone Filler (CTF) is a cementitious material in powder form. Perma C-Tone Filler only needs on site addition of water to make a mortar which is used for grouting tile joints. It is also used for grouting the joints between stones, marbles, cut stones etc. Conventional type of grouting with white or colored cements make the joint rigid and it collects dust, dirt & stains. The cements also have a high shrinkage property & tends to CREATE leakage problems. Perma C-Tone Filler is modified to give high tensile strength, non shrink and waterproof properties. Further the product does not take stains and keeps the joints clean if cleaned properly with a detergent solution periodically.


PRIMARY USES

  • Perma C-Tone Filler is used for grouting tile joints.
  • It is also used for grouting the joints between marble, granite tiles and joints of cut stones and terracotta tiles.
  • Perma C-Tone Filler is specially selected for grouting swimming pool tile joints because of its excellent waterproof properties.

DIRECTIONS FOR USE

Ensure that the tile joints are clean and dry. Blow out any dust or dirt from the tile joints. Mix Perma C-Tone Filler with clean water, in the proportion of 3.5 volumes of powder to 1 volume of water. Mix till a uniform consistency smooth paste of uniform color is obtained. Leave the paste for ten minutes in the pan for the entrapped air if any to escape and remix the paste. If the color of the paste does not match with indicated shade of the shade card remix it till the shade close to the shade card shade is obtained. Apply the paste liberally into the joints with a putty blade and even out the paste in the joint. After three to four hours, wipe out the excess Perma C-Tone Filler from the tiles with a wet sponge. Grout the tile joints with Perma C-Tone Fillerafter 24 hours of tile laying.

ADVANTAGES

  • Available in a range of pleasant shades.
  • Joints become crack free.
  • No staining of the joints.
  • Makes the tiled area waterproof.

PROPERTIES

INGREDIENTS RESULTS
Colour Available in shades as per shade card
Form Free Flowing Powder
Appearance Coloured pre-mixed
Bulk Density ˜ 1g/cc
Mixing water ˜ 1 : 4 water to powder by volume
Specific weight of the mixture ˜ 2 kg/ltr
Pot life = 90 min.
Temperature range for application from +5 °C to +35 °C
Width of joints from 0 to 5 mm
Foot traffic ˜ 12 – 24 hrs
Coverage See Coverage table
   
   

COVERAGE

Coverage of Perma C-Tone Filler depends on the size of the tile, thickness of the tile and the width of the joint. A table is available in the shade card of Perma C-Tone Filler which gives coverage for various sizes of tiles in different joint widths. Coverage is specified in Sq.ft. per pack of 500 gms.

COVERAGE TABLE

1 kg pack of grout is enough to grout the tile joint of the following areas in square feet as per tile sizes and joint widths given below for a depth of 8 mm

TILE JOINT WIDTH 2 MM 3 MM 4 MM 5 MM 6 MM
tile  
  L R L R L R L R L R
1" x 1" 16 13 11 8 8 6 7 5 5 4
6"x 6" 50 40 35 28 25 20 20 16 14 12
4" x 8" 45 35 30 24 22 17 18 14 16 12
8" x 8" 65 51 45 35 35 28 30 24 24 20
8" x 12" 80 63 55 43 40 31 33 26 25 20
12" x 12" 95 75 65 51 50 39 42 33 34 28
250 x 400 MM 104 82 69 54 52 41 43 34 35 28
300 x 450 MM 120 94 80 63 60 47 48 38 40 32
302 x 605 MM 143 112 96 75 72 57 58 46 48 38
300 x 925 MM
605 x 605 MM
191 150 128 100 96 75 77 60 64 50
  925 x 925 MM 287 255 192 150 144 113 116 90 96 75
                       

PERFORMANCE

INGREDIENTS RESULTS
Flexural strength after 28 days ≥ 6 N/mm2
Resistance to frost-thaw cycles:
Flexural ≥ 2.5 N/mm2
Compressive ≥ 25 N/mm2
Water absorption after 30 min. ≤ 1,3 g
Water absorption after 240 min. ≤ 3,5 g
Working temperature from -40 °C to +90 °C
 

PACKING

Perma C-Tone Filler is available in 500 gms, 1 kg Corrugated printed cartons and in 10 Kg multi-wall laminated sacks.

SHELF LIFE

Perma C-Tone Filler has a shelf life of 12 months if stored in Manufacturer's original packing in a cool and dry place away from moisture and heat./p>

DISCLAIMER

PERMA warrants that all products are free from any defects of manufacture and comply with the specifications given in their respective technical data sheet. No warranty can be given as to the results of use because conditions of use, such as site conditions, surface preparations, workmanship, weather, structural issues and other factors are beyond the control of PERMA. Purchaser agrees to seek the advice of qualified professionals to carry out tests & take trials to determine the suitability of products for their intended purpose prior to full scale usage of PERMA products and assumes all risks.

The company does not assume any liability for unsatisfactory results, arising from the use of our products. Purchaser’s sole liability is limited to replacement of product or refund of the purchase price paid if any product proven defective. No other warranties, express or implied, shall apply including any warranty of merchantability or fitness for a particular purpose. PERMA shall not be liable for any consequential damages arising from the use of our products for unsatisfactory results.

The information supplied in this datasheet is based on our experience through extensive research and is given in good faith in order to help prospective users. We reserve the right to update the information provided in our technical data sheet at any time without prior notice within the scope of technical progress or new developments.


Click the below Button to print the current page.

 
Contact Us
X

Contact Form