Perma Strike

WATER BASED MOULD RELEASE AGENT
DESCRIPTION

Perma Strike is a universal ready to use water based mould release agent designed for clean release of concrete from form work made of plywood, metal, timber and other materials used in construction. It is based on special release chemical ingredients in aqueous form, which makes the system cost effective and eco-friendly. Perma Strike enables the form work to be released easily, resulting in smooth surface, free from surface blemishes and stains. Because of these characteristics Perma Strike is recommended for all types of cements including white cement.

Perma Strike

PRIMARY USES

Perma Strike is suitable for all types of cements and all types of shuttering materials or moulds. It is used in multi storied structures with the advantage of enhanced shutter life. It is successfully used in precast yards with minimum effect on the mould and resulting in continued desired finish of the pre-cast element.

ADVANTAGES

  1. It is ready to use and no dilution required at the time of application.
  2. It can be sprayed for fast application on large areas.
  3. It is eco friendly, does not release volatiles as it is not based on any hydro-carbon chemistry.
  4. Quick and positive release without any damage to concrete or the shuttering / mould material.
  5. Protects and extends the life of formwork for repeated use.
  6. Safe to use with white cement.
  7. Economical.

DIRECTIONS FOR USE

No surface preparation is needed in case of new moulds and shutters. In case of old shutters and moulds all materials adhering to the form work such as concrete, oil and greasy deposits must be removed by suitable means before application of Perma Strike.

Stir well before application. Small separation is normal and the product get mixed easily on stirring. Perma Strike can be applied by brush, roller or sprayed with suitable spray equipment. Apply a thin coat and any excess of Perma Strike should be removed.

PROPERTIES

Appearance : Milky white liquid
Specific Gravity : 0.98 ± 0.02
Flow Property : Easy to apply
Chloride Content : Nil
Coverage : 10 to 20 m² depending on the surface.

PACKING

Perma Strike is available in 10ltr, 20ltr & 100ltr packing.

SHELF LIFE

Perma Strike has a shelf life of 24 months if stored in manufacturer’s original packing in a cool and dry place.

DISCLAIMER

PERMA warrants that all products are free from any defects of manufacture and comply with the specifications given in their respective technical data sheet. No warranty can be given as to the results of use because conditions of use, such as site conditions, surface preparations, workmanship, weather, structural issues and other factors are beyond the control of PERMA. Purchaser agrees to seek the advice of qualified professionals to carry out tests & take trials to determine the suitability of products for their intended purpose prior to full scale usage of PERMA products and assumes all risks.

The company does not assume any liability for unsatisfactory results, arising from the use of our products. Purchaser’s sole liability is limited to replacement of product or refund of the purchase price paid if any product proven defective. No other warranties, express or implied, shall apply including any warranty of merchantability or fitness for a particular purpose.
PERMA shall not be liable for any consequential damages arising from the use of our products for unsatisfactory results.

The information supplied in this datasheet is based on our experience through extensive research and is given in good faith in order to help prospective users. We reserve the right to update the information provided in our technical data sheet at any time without prior notice within the scope of technical progress or new developments.