Perma R-Tone Filler-WD

WATER DISPERSIBLE EPOXY BASED TILE JOINT FILLER
SPECIFICATION

BS-5980:1980, Draft CEN:prEN 12004-1997 . BS-5385:Part4:1992,Section 9.

DESCRIPTION

Perma R-Tone Filler-WD is a three component product consisting of water dispersible epoxy base, reactor and filler. It only needs on site mixing of the three ingredients to get a uniform consistency smooth paste which is used for filling tile joints. It is also used for filling the joints between stones, marbles, cut stones etc. Conventional cement based joint fillers are not strong enough they have the tendency of promoting the growth of bacterial colonies and the epoxy based tile joint fillers do not satisfy the hygienic standards laid down by the food and pharmaceutical industry. R-Tone Filler-WD is available in SELECTED shades, giving an ample choice of creating the desired pattern with matching or contrast shade of R Tone Filler-WD With the shade of tiles.

Perma R-Tone Filler-WD

PRIMARY USES

Perma R-Tone Filler-WD is used for filling tile joints in areas where utmost hygienic conditions are desired. It is recommended in joint filling of tiles in hospitals, operation theatres, pharmaceutical industry and food processing industry.

GUIDE TO APPLICATION

Ensure that the tile joints are clean and dry. Mix the base and the reactor components of Perma R-Tone Filler-WD and add the filler component. Mix thoroughly to obtain a uniform consistency smooth paste. Fill this paste in the tile joints and finish it smooth. Any excesses or spillages on the tile surface can be cleaned out with a wet cloth or sponge when the product is still wet. As a standard practice tile joint filling is done 24 hours after laying the Tiles adhesives.

ADVANTAGES

  1. Available in selected shades-Ivory, Creamy Yellow, Golden Yellow, Creamy Pink, Frosty Brown, Copper Cloud, Pista Green, Sky Blue, Royal Blue, Terracotta Brown, Silver Grey, Leafy Green, Ocean Blue and many more.
  2. Joints become strong and hygienic.
  3. No staining of the joints.
  4. Makes the tiled area germproof.

PROPERTIES

Density : 1650kg/m3
Pot Life Of Paste : 60 min at 35° C
Form : Three component
Color : Available in selected shades
Temperature Resistance : Prolonged -30°-70°C, intermittent up to 100°C
Water Absorption : NIL
Tensile Adhesion : Epoxy Grout Dry >4.5 kN , Wet >3.6 kN

CHEMICAL RESISTANCE

RTF has excellent resistance to the following chemicals: hydrocarbon solvents, oils, fats, diesel, fuel, sugar solution, salt and several acids.

CHEMICAL EPOXY GROUT
Acetic Acid (10%), Acetone *
Acetyl Bromide, Benzene, Butyl Acetate *
Carbon Disulphide, Carbon Tetrachloride *
Chloroform, Chromic Acid, Ethyl Alcohol *
Formic Acid, Lime Juice, Nitric Acid (10%) *
Phenol, Sulphuric Acid (45%) *
Acetic Acid (5%), Ammonium Bromide **
(5%) Household Ammonia, Hydrobromic **
Acid, Hydrochloric Acid (dil), Lactic Acid **
(3%) Methanol, Phosphoric Acid (10%), **
Sodium Hydroxide **
Aluminium Bromide, Aluminium Fluoride ***
Baking Soda, Barium Hydroxide, Beer, ***
Boric Acid, n-Butanol, Calcium Chloride, ***
Calciuni Hydroxide, Carbbnaies,’ Carbonic ***
Acid Calcium Oil, Chlorides, Chlorinated ***
Paraffin, Citric Acid,.Coconut oil, Cotton ***
Seed  Oli, Diesel’ Oil, Dilute Detergents ***
Ethanol Ethylene glycol, fats ferric ***
Chloride fish oil; Fluorides (except HE), ***
Gasoline, Ground Nut Oil,Heptane, ***
Kerosene, Linseed oil, Lubricating Oils,
Mile Nitrates, Olive all, oleiC Acid, ***
Palm Kernel oil, Palm Oil, Paraffin Wax ***
Pine oil, Polypropylene Glycol, Potassium Hydroxide, Proprietary Sterillising Agents ***
Sillicates, Sodium Canbonate, Sodium Chloride, Sodium Hypochlorite Soin.
 (15% avallable, chlorine) Soya Bean Oil, ***
Sugars, Sulphates, Sunflower Seed Oil, ***
Tannic Acid, Tetrahydronahpthalene ***
1,1,1 -Trichloroethant, Vegetable Oils ***
Water, White Spirit ***
* Splash contact only.
** Contact for max 24 hours before washing off.
*** prolonged contact

COVERAGE

20 sq.ft. per Kg if the joint width is 8 mm and tile size is 12″ x 12″.
A table is available in the shade card of C- Tone filler which gives coverage for various sizes of tile in different joint widths. Coverage is specified in sqft per pack of 1/2 kg. The same coverage chart can be used to assess the quantities of RTF-WD required for an area.

PACKING

Perma R- Tone Filler-WD is available in 1 kg. and 10 kg Packing.

SHELF LIFE

Perma R-Tone Filler-WD has a shelf life of 12 months if stored in manufacturer’s original packing, in a cool and dry place away from moisture and heat.

DISCLAIMER

PERMA warrants that all products are free from any defects of manufacture and comply with the specifications given in their respective technical data sheet. No warranty can be given as to the results of use because conditions of use, such as site conditions, surface preparations, workmanship, weather, structural issues and other factors are beyond the control of PERMA. Purchaser agrees to seek the advice of qualified professionals to carry out tests & take trials to determine the suitability of products for their intended purpose prior to full scale usage of PERMA products and assumes all risks.

The company does not assume any liability for unsatisfactory results, arising from the use of our products. Purchaser’s sole liability is limited to replacement of product or refund of the purchase price paid if any product proven defective. No other warranties, express or implied, shall apply including any warranty of merchantability or fitness for a particular purpose.
PERMA shall not be liable for any consequential damages arising from the use of our products for unsatisfactory results.

The information supplied in this datasheet is based on our experience through extensive research and is given in good faith in order to help prospective users. We reserve the right to update the information provided in our technical data sheet at any time without prior notice within the scope of technical progress or new developments.