Perma Peak Super

HIGH PERFORMANCE TILE ADHESIVE FOR NON-ABSORPTIVE PROFILES
SPECIFICATION

BS 5980:1980,IS:15477:2004

DESCRIPTION

Perma Peak Super is a non slip cementitious high adhesion quartz and filler based adhesive product with high dispersion polymers and binders to impart permanent stability for fixing of tiles. Highly recommended for fixing tiles on floor and walls. Available as a white or grey cement based material.

Perma Peak Super

PRIMARY USES

Perma Peak Super is used to fix tiles for outdoor and indoor application. Glazed tiles, vitrified, non-vitrified tiles, porcelain, stoneware tiles go well with Perma Peak Super . Perma Peak Super is used for fixing tiles on difficult surfaces.

DIRECTIONS FOR USE

Clean the surface free of all deleterious material. Mix Perma Peak Super 3.5 parts by volume of powder to 1 volume of water using a slow speed drill apparatus. Mix material to a lump free homogeneous consistency and leave it for 10 minutes. Remix and start spreading the material on to the applied area and to the back of the tile using a notched trowel to desired thickness. Press the tile, stone to the substrate and lightly tap with a light hammer for even spread. Fill the joints after 24 hrs.

ADVANTAGES

  1. For fixing tiles, stones on difficult surfaces.
  2. Can be used for tile on tile application.
  3. Can be used in swimming pools and for facade tile fixing.
  4. Withstand high temperature.
  5. Waterproofs the tiled area if applied evenly.

PROPERTIES

Mixing Ratio : 3.5 times volume of powder to 1 volume of water
Pot Life of Paste : 120 minutes at 25°C
Open Time for tile adjustment : 45 minutes @25°C
Bedding Thickness : 3 mm to 10 mm
Shear Adhesion After 28 days : 1 MPa ANSIA-118.1
Tensile adhesion on Concrete after 28 days : ≥1 MPa EN1348
Adhesion after heat gain : ≥1 MPa EN1348
Adhesion after water immersion : ≥1 MPa EN1348
Adhesion after freeze thaw Cycle : ≥1 MPa EN1348
Working temperature :  -5° C to 80° C

COVERAGE

1 kg of Perma Peak Super covers an area of 1.61 sq. ft. for 4 mm thickness.

PACKING

Perma Peak Super is available in 25 kg and 50 kg sacks.

SHELF LIFE

Perma Peak Super has a shelf life 12 months from the date of manufacture.

DISCLAIMER

PERMA warrants that all products are free from any defects of manufacture and comply with the specifications given in their respective technical data sheet. No warranty can be given as to the results of use because conditions of use, such as site conditions, surface preparations, workmanship, weather, structural issues and other factors are beyond the control of PERMA. Purchaser agrees to seek the advice of qualified professionals to carry out tests & take trials to determine the suitability of products for their intended purpose prior to full scale usage of PERMA products and assumes all risks.

The company does not assume any liability for unsatisfactory results, arising from the use of our products. Purchaser’s sole liability is limited to replacement of product or refund of the purchase price paid if any product proven defective. No other warranties, express or implied, shall apply including any warranty of merchantability or fitness for a particular purpose.
PERMA shall not be liable for any consequential damages arising from the use of our products for unsatisfactory results.

The information supplied in this datasheet is based on our experience through extensive research and is given in good faith in order to help prospective users. We reserve the right to update the information provided in our technical data sheet at any time without prior notice within the scope of technical progress or new developments.