Perma MRA C-40

AN EMULSIFYING AGENT TO CONVERT DIESEL INTO A MOULD RELEASE AGENT
DESCRIPTION

Perma MRA C-40 is an emulsifying agent to be mixed with diesel to obtain a mould release agent.

Perma MRA C-40

PRIMARY USES

Perma MRA C-40 when mixed with diesel functions like a mould release agent and it can be applied to all types of shutters, moulds, steel, timber, plywood, plastic and rubber moulds.

DIRECTIONS FOR USE

Just mix Perma MRA C- 40 in diesel in the proportion of 1 ltr Perma MRA C-40 to 40 ltrs of diesel. The concentrate can be directly added to the drum containing diesel close to the lid and rolled over to obtain uniformity in mixing. The mixed material is ready to be used as a mould release agent.

PROPERTIES

Form : Straw coloured Liquid
Specific Gravity : 0.80 to 0.85 at 27°C

COMPOSITION

Low viscosity hydrocarbon vehicle blended with chemically active release agent.

COVERAGE

Perma MRA C-40 when mixed with 40 ltr of diesel covers an area of 25 to 50m2/litre when spray applied. On new steel shutters the coverage is about 50m2/litre. In case of plywood and metal shutters better coverage results are obtained by progressive use. When brush applied less coverage is obtained because of evaporation losses.

HEALTH AND SAFETY

Perma MRA C-40 is non toxic and safe.

PACKING

Perma MRA C-40 is available in 20 ltr drum.

SHELF LIFE

Perma MRA C-40 has a shelf life of 24 months from the date of manufacture if stored in a cool dry place in original packing.

DISCLAIMER

PERMA warrants that all products are free from any defects of manufacture and comply with the specifications given in their respective technical data sheet. No warranty can be given as to the results of use because conditions of use, such as site conditions, surface preparations, workmanship, weather, structural issues and other factors are beyond the control of PERMA. Purchaser agrees to seek the advice of qualified professionals to carry out tests & take trials to determine the suitability of products for their intended purpose prior to full scale usage of PERMA products and assumes all risks.

The company does not assume any liability for unsatisfactory results, arising from the use of our products. Purchaser’s sole liability is limited to replacement of product or refund of the purchase price paid if any product proven defective. No other warranties, express or implied, shall apply including any warranty of merchantability or fitness for a particular purpose.
PERMA shall not be liable for any consequential damages arising from the use of our products for unsatisfactory results.

The information supplied in this datasheet is based on our experience through extensive research and is given in good faith in order to help prospective users. We reserve the right to update the information provided in our technical data sheet at any time without prior notice within the scope of technical progress or new developments.