Perma Master Wrap Primer WP-10

NON SOLVENTED EPOXY PRIMER FOR CONCRETE SURFACES
DESCRIPTION

Porosity of concrete surface, moisture and the alkalinity of the concrete surface makes it difficult for the epoxy products to bind with the concrete bases effectively. To get over these problems an effective epoxy primer is made use of. Master Wrap Primer WP-10 is
a two component product based on non solvented epoxy base and epoxy hardner. Master Wrap Primer WP-10 binds the epoxy products firmly to the cementitious bases.

Perma Seal Admix

PRIMARY USES

To bind epoxy mortars and flooring products to the concrete base taking care of the porosity of the base and mobilising the particles of the mortars into the crevices and holes in the base.

APPLICATIONS

Perma Master Wrap Primer WP-10 is applied on a dry concrete surface which is at least 28 days old before laying epoxy materials. Master Wrap Primer WP-10 forms a part of the system with Master Wrap Saturant WS-20.

ADVANTAGES

  1. Master Wrap Primer WP- 10 thoroughly wets the concretes surface and mobilises the particles of the epoxy products effectively on the concrete surfaces and make it easier for epoxy products to bind with the concrete effectively.
  2. Master Wrap Primer WP-10 being moisture tolerant makes the priming easy. There is no need to blow torch the surface to make them bone dry. A reasonably dry surface is good enough
  3. Master Wrap Primer WP-10 is resistant to alkalis hence there is no need for the cumbersome process of acid itching the surface.

SUFACE PREPARION

Surface to be primed with Master Wrap Primer WP-10 should be free from dust, dirt, oil, grease, loose particles and excessive moisture.

COVERAGE

Perma Master Wrap Primer WP-10 covers 3-4 sq. mtr. per kg. Higher coverage may be
achieved if the base is sufficiently smooth and good.

DIRECTION FOR USE

Mix the base and the rector components of Master Wrap Primer WP-10 till a uniform consistency and colored liquid is obtained. Brush apply this on the surfaces to be primed.

HEALTH AND SAFTY

MEpoxy products generally cause irritation to the skin. Use of hand gloves by the workers is advised. Upon completion of day’s work all the packing material should be burnt and
buried.

PACKING

Perma Master Wrap Primer WP-10 is available in 1 kg pre weighted units.

SHELF LIFE

Perma Master Wrap Primer WP-10 has a shelf life of 12 months from the date of manufacture.

DISCLAIMER

PERMA warrants that all products are free from any defects of manufacture and comply with the specifications given in their respective technical data sheet. No warranty can be given as to the results of use because conditions of use, such as site conditions, surface preparations, workmanship, weather, structural issues and other factors are beyond the control of PERMA. Purchaser agrees to seek the advice of qualified professionals to carry out tests & take trials to determine the suitability of products for their intended purpose prior to full scale usage of PERMA products and assumes all risks.

The company does not assume any liability for unsatisfactory results, arising from the use of our products. Purchaser’s sole liability is limited to replacement of product or refund of the purchase price paid if any product proven defective. No other warranties, express or implied, shall apply including any warranty of merchantability or fitness for a particular purpose.
PERMA shall not be liable for any consequential damages arising from the use of our products for unsatisfactory results.

The information supplied in this datasheet is based on our experience through extensive research and is given in good faith in order to help prospective users. We reserve the right to update the information provided in our technical data sheet at any time without prior notice within the scope of technical progress or new developments.