Perma Master Floor-SL

AESTHETIC SELF LEVELLING EPOXY FLOORING
DESCRIPTION

Perma Master Floor-SL is a three component epoxy resin based mortar for application to a variety of subfloors as a joint less, thin, self-levelling topping. MASTER FLOOR-SL quickly provides a permanent, hard wearing chemical resistant finish for floors and corridors subject to pedestrian and light wheeled traffic. It provides a smooth, hygienic and dust free floor that can be easily cleaned.

Perma Master Floor-SL

PRIMARY USES

To provide a seamless, hygienic, self-levelling floor topping for areas subject to pedestrian and light wheeled traffic.

TYPICAL APPLICATIONS

Perma Master Floor-SL self-levelling floorings are designed for use in : Operation Theatres, Agricultural Buildings, Factories, Laboratories, Bakeries, Supermarkets, Showrooms, Bottling Plants, Power Stations, Wear Houses, Breweries, Garages, Machine Shops, Chemical Plants, Dairies, Hospitals, Refineries, Subways, Sewage treatment Plants, and many other Industrial and commercial applications.

ADVANTAGES

  1. High Compressive, flexural and tensile strengths in excess of concrete.
  2. Available in range of attractive colors Brown, Green, Blue, Grey, etc.
  3. Chemical Resistant and waterproof.
  4. Hygienic and non-dusting.
  5. Easy to use, easy to clean.
  6. Epoxy based, supplied in pre-weighted units.
  7. Will not support bacterial growth.

TYPICAL PROPERTIES

Density : 1500 kg/m3
Screed Thickness : 1.5 to 3 mm
Pot Life : 45 min at 25°C
Tack Free Time : 3 hours at 25°C
Initial/Full Cure : 6 hrs / 7 days at 25°C
Flash Point : Over 200°C
Service Temperature : -20° C + 60° C

CHEMICAL RESISTANCE

Perma Master Floor-SL has excellent resistance to the following chemicals: Hydrocarbon solvents, Oils & Fats, Diesel, Fuel and Petrol, Sugar solutions and salts.

DIRECTIONS FOR USE

Preparation of Sub Floor: Floors should be dry, clean and free of laitance, dust, greases, paint, bitumen, etc. Concrete should have low moisture content, be degreased and if necessary acid etch, wash and leave it to dry.

Application: Apply masking tape to borders of the floor to achieve straight edges, Use Perma Master Prime -CN as a primer. Lay Perma Master Floor-SL after one or two hours. Pour part of the mixed material on to floor and trowel in. Pour remainder on to this area and trowel to desired thickness. Retrowel to remove air bubbles. Where a non-slip surface is required, the uniform broadcasting of non-skid granules such as silicon carbide on to the MASTER FLOOR-SL before it has completely hardened, is suggested.

COVERAGE

2 – 4 sq.ft per kg at 3 to 1.5 mm thickness.

HEALTHY AND SAFETY

Epoxy products generally cause irritation to the skin. Use of hand gloves by the workers is advised. Upon completion of day’s work all the packing material should be burnt and buried.

PACKING

Perma Master Floor-SL is available in 5 kg and bulk in pre weighted units.

SHELF LIFE

Perma Master Floor-SL has a shelf life of 12 months from the date of manufacture.

DISCLAIMER

PERMA warrants that all products are free from any defects of manufacture and comply with the specifications given in their respective technical data sheet. No warranty can be given as to the results of use because conditions of use, such as site conditions, surface preparations, workmanship, weather, structural issues and other factors are beyond the control of PERMA. Purchaser agrees to seek the advice of qualified professionals to carry out tests & take trials to determine the suitability of products for their intended purpose prior to full scale usage of PERMA products and assumes all risks.

The company does not assume any liability for unsatisfactory results, arising from the use of our products. Purchaser’s sole liability is limited to replacement of product or refund of the purchase price paid if any product proven defective. No other warranties, express or implied, shall apply including any warranty of merchantability or fitness for a particular purpose.
PERMA shall not be liable for any consequential damages arising from the use of our products for unsatisfactory results.

The information supplied in this datasheet is based on our experience through extensive research and is given in good faith in order to help prospective users. We reserve the right to update the information provided in our technical data sheet at any time without prior notice within the scope of technical progress or new developments.