Perma Master Floor-HD


Perma Master Floor-HD is a high performance three component epoxy resin based concrete that provides a rough looking extremely strong bedding mortar or screed mortar to industrial floors.

Perma Master Floor-HD


  1. Abrasion resistant and hard wearing.
  2. Slip resistant.
  3. High Strength.
  4. Easy to handle.
  5. Resistant to chemicals and aggressive substances.


Density : 2000 kg/m3
Pot Life : 45 min at 25°C
Compressive Strength : 65 n/mm2
Tensile Strength : 12 n/mm2
Flexural Strength : 28 n/mm2


Surface preparation:
As with all epoxy resin systems, surface preparation is of prime importance. For concrete surfaces, remove all grease, oil, dust, laitance etc. Ensure substrate to receive the screed is sound, cut back to sound surface wherever necessary.

Remove dust and ensure that the surface is dry. Prime with Perma Master Prime-CN.

Do not split packs or alter the components in any way. Mix in a suitable mechanical pan type resin mixer. Thoroughly mix both liquid components together prior to the addition of the aggregate component. Remix until the aggregate is completely dispersed.

Tip or apply the mixed Perma Master Floor-HD onto the primed surface – the primer must still be fully tacky. Rake or spread out to the thickness required, compact and finish with a steel trowel.


Perma Master Floor-HD shall be laid on suitable prepared surfaces where indicated. Perma Master Floor-HD is manufactured to the following specifications.

Composition : 3 component solvent free epoxy resin based system filled with aggregates.
Density : 2000 kg/m3
Compressive Strength : 65N/mm2
Tensile Strength : 12N/mm2
Flexural Strength : 28N/mm2
Chemical Resistance : Excellent to a wide range of chemicals, oils, etc.


Perma Master Floor-HD covers 0.50 sq. ft. to 1.50 sft per kg. depending upon the thickness of the screed.


Epoxy products generally cause irritation to the skin. Use of hand gloves by the workers is advised. Upon completion of day’s work all the packing material should be burnt and buried.


Perma Master Floor-HD is available in 10 kg and in bulk packing.


Perma Master Floor-HD has a shelf life of 12 months from the date of manufacture.


PERMA warrants that all products are free from any defects of manufacture and comply with the specifications given in their respective technical data sheet. No warranty can be given as to the results of use because conditions of use, such as site conditions, surface preparations, workmanship, weather, structural issues and other factors are beyond the control of PERMA. Purchaser agrees to seek the advice of qualified professionals to carry out tests & take trials to determine the suitability of products for their intended purpose prior to full scale usage of PERMA products and assumes all risks.

The company does not assume any liability for unsatisfactory results, arising from the use of our products. Purchaser’s sole liability is limited to replacement of product or refund of the purchase price paid if any product proven defective. No other warranties, express or implied, shall apply including any warranty of merchantability or fitness for a particular purpose.
PERMA shall not be liable for any consequential damages arising from the use of our products for unsatisfactory results.

The information supplied in this datasheet is based on our experience through extensive research and is given in good faith in order to help prospective users. We reserve the right to update the information provided in our technical data sheet at any time without prior notice within the scope of technical progress or new developments.