Perma Granolite EP


Perma Granolite EP is a two component clear epoxy system for use in grouting cracks and pin holes in stone surfaces before grinding and polishing. The product is especially suited for granite stones as the strength of epoxies are comparable to that of granites, but it can be used for other stones as well successfully.

Perma Granolite EP


  1. Perma Granolite EP is clear and hence does not interfere with the natural shades and textures of the stones.
  2. Perma Granolite EP is low viscosity hence helpful in penetrating into the stone surface and filling up all pin holes and cracks.
  3. Perma Granolite EP is quick setting and hence helps in achieving high early and final strengths and allows early grinding and polishing of the stones.
  4. Perma Granolite EP is UV resisting and hence does not yellow on exposure to sunlight.
  5. Perma Granolite EP gives a good shine and lusture the the stone surface enhancing its beauty multifold.


  1. Clean the stone surface to be grouted and lay it horizontally. Ensure that the surface is free from moisture and stains.
  2. Mix part A and part B of Perma Granolite EP thoroughly using a mechanical stirrer and pour the resultant liquid on to the stone surface.
  3. Using a spatula or a rubber scrapper work well the Perma Granolite EP liquid into granite or the stone surface and remove the excess material from the surface by thoroughly scraping it out.
  4. Allow the surface grout to harden for 24 hours and thereafter grinding and polishing can be done as per usual practice.


Colour Clear Clear
Viscosity 200 cps 100 cps
Mixing Ratio By Weight 727 gms 273 gms
Mixing Ratio By Volume 3.5 Parts 1.5 Parts
Pot Life at 30°C 55 to 60 minutes
Setting time at 30°C 90 minutes


Depends upon porosity of the marble, granite and stone.


Perma Granolite EP is available in 1 kg, 2kg and bulk in premeasured packs of base and reactor.


Perma Granolite EP has a shelf life of 12 months from the date of manufacture.


PERMA warrants that all products are free from any defects of manufacture and comply with the specifications given in their respective technical data sheet. No warranty can be given as to the results of use because conditions of use, such as site conditions, surface preparations, workmanship, weather, structural issues and other factors are beyond the control of PERMA. Purchaser agrees to seek the advice of qualified professionals to carry out tests & take trials to determine the suitability of products for their intended purpose prior to full scale usage of PERMA products and assumes all risks.

The company does not assume any liability for unsatisfactory results, arising from the use of our products. Purchaser’s sole liability is limited to replacement of product or refund of the purchase price paid if any product proven defective. No other warranties, express or implied, shall apply including any warranty of merchantability or fitness for a particular purpose.
PERMA shall not be liable for any consequential damages arising from the use of our products for unsatisfactory results.

The information supplied in this datasheet is based on our experience through extensive research and is given in good faith in order to help prospective users. We reserve the right to update the information provided in our technical data sheet at any time without prior notice within the scope of technical progress or new developments.