Perma Glass Tile Mortar

A POLYMER BASED ADHESIVE FOR FIXING GLASS MOSAIC TILES
SPECIFICATION

BS 5980:1980, Draft CEN:prEN 12004-1997

DESCRIPTION

Perma Glass Tile Mortar (GTM) is a polymer modified cementitious material in white powder form which only needs on site addition of water to make a paste which is used for filling and fixing glass mosaic tiles. It is suitable for use on vertical as well as horizontal surfaces.

Perma Glass Tile Mortar

PRIMARY USE

Perma Glass Tile Mortar is especially developed for fixing and filling glass mosaic tiles. Glass Mosaic tile fixing technique requires that the joint filling is done first and the fixing mortar is applied thereafter. Sometimes same material is used for fixing as well as joint filling. Hence Perma Glass Tile Morta is made in brilliant white colour. Perma Glass Tile Mortar not only helps in scientific fixing of the glass mosaic tiles but also makes the tiled area waterproof.

GUIDE TO APPLICATION

Ensure that the surface to be tiled is clean and free from dust, dirt, grease etc. Mix Perma Glass Tile Mortar with clean water in the proportion of 3.5 volumes of powder to 1 volume of water. Mix till a uniform consistency, smooth white paste is obtained. Leave the paste for ten minutes in the pan for the entrapped air if any, to escape and remix the paste. Apply the paste uniformly on to the surface to be tiled as well as on the back of the Glass Mosaic tiles till the joints therein are effectively filled and press the tiles in position. Same day wash out the back up paper with wet scrubber.

ADVANTAGES

  1. Single component hence easy to use.
  2. No wetting of surface to be tiled.
  3. Makes the tiled area waterproof.
  4. Perma Glass Tile Mortar is specially developed for fixing glass mosaic tiles.

PROPERTIES

Bulk Density : 1650 kg/m3
Pot Life Of Paste : 45 min at 35°C
Form : Free flowing powder
Color : Brilliant White

COVERAGE

1 kg of Perma Glass Tile Mortar yields a white paste of 600 cc. Glass Mosaic tiles when fixed with a uniform thin bed will cover an area of 5 sq.ft./Kg.

EQUIPMENT CARE

All equipment and tools must be cleaned immediately after use with water or Cleaning Solvents as the case may be. Similar procedures should be adopted for break periods exceeding 15 minutes.

PACKING

Perma Glass Tile Mortar is available in10 Kg and 25 Kg multi-wall laminated sacks.

SHELF LIFE

Perma Glass Tile Mortar has a shelf life of 12 months if stored in manufacturer’s original packing in a cool and dry place away from moisture and heat.

DISCLAIMER

PERMA warrants that all products are free from any defects of manufacture and comply with the specifications given in their respective technical data sheet. No warranty can be given as to the results of use because conditions of use, such as site conditions, surface preparations, workmanship, weather, structural issues and other factors are beyond the control of PERMA. Purchaser agrees to seek the advice of qualified professionals to carry out tests & take trials to determine the suitability of products for their intended purpose prior to full scale usage of PERMA products and assumes all risks.

The company does not assume any liability for unsatisfactory results, arising from the use of our products. Purchaser’s sole liability is limited to replacement of product or refund of the purchase price paid if any product proven defective. No other warranties, express or implied, shall apply including any warranty of merchantability or fitness for a particular purpose.
PERMA shall not be liable for any consequential damages arising from the use of our products for unsatisfactory results.

The information supplied in this datasheet is based on our experience through extensive research and is given in good faith in order to help prospective users. We reserve the right to update the information provided in our technical data sheet at any time without prior notice within the scope of technical progress or new developments.